Meet Engineering Supply Chain UK at MACH 2026
/Engineering Supply Chain UK (ESCUK) is thrilled to be exhibiting at MACH 2026, the UK’s flagship event for the engineering and manufacturing industries, taking place at the NEC Birmingham from 20–24 April 2026. ESCUK is supporting the Engineering Supply Chain Zone located in Hall 17, where companies will be showcasing the strength and capabilities of […]
Read more
Manufacturers urge the Government to supercharge the ‘sovereign capability’ push according to new report
/UK manufacturing is ready to meet the call for more sovereign ‘production’ capability according to a new survey out today, but industry will need Government help to make it a reality. The findings, which will be discussed at the launch of MACH 2026 today in Birmingham, reveal that thousands of firms are keen to support […]
Read more
MACH 2026 to highlight the importance of tooling through expert-led seminars
/MACH 2026 to highlight the importance of tooling through expert-led seminars With just weeks to go, MACH 2026, the UK’s flagship event for the manufacturing and engineering sector, returns to the NEC Birmingham from 20–24 April 2026. The event will bring together the latest innovations, industry expertise and valuable networking opportunities under one roof. MACH […]
Read more
MACH 2026 receives CPD accreditation for its content-rich seminar programme
/The Manufacturing Technologies Association (MTA), organisers of MACH, is pleased to announce that the MACH 2026 seminar programme has been CPD-accredited by The CPD Group. This accreditation enables attendees at the event, taking place from 20-24 April at the NEC Birmingham, to earn recognised CPD credits and certificates. This further reinforces the event’s reputation as […]
Read more
MACH 2026 to showcase the best of sheet metal and fabrication technology
/MACH is widely recognised as the UK’s largest manufacturing exhibition, typically bringing together more than 500 exhibitors to showcase their latest advanced manufacturing technologies, processes and solutions. Owned and organised by the Manufacturing Technologies Association (MTA), this biennial event will return to the NEC Birmingham from 20-24 April, promising to deliver a platform for the […]
Read more
MACH 2026 to showcase the very best in advanced manufacturing technologies
/MACH 2026 is fast approaching and is expected to attract thousands of attendees once again at the NEC in Birmingham from 20-24 April. Across the five exhibition halls, the dedicated technology zones will be focal points of vibrant activity. Throughout the week, exhibitors will showcase an array of new, inspiring engineering-based manufacturing technologies and solutions, […]
Read more
Headline Sponsor Content: Why machinery is the investment opportunity that cannot be ignored
/Dave Atkinson, UK Head of Manufacturing, SME & Mid-Corporates at Lloyds The business case for investing in new machinery is well understood by manufacturers. The right equipment can support diversification, boost productivity, reduce operational costs, increase capacity and improve energy efficiency. Yet the sector has experienced a prolonged period of underinvestment. This is understandable. Weaker […]
Read more
MACH 2026 reveals an impressive seminar programme designed to support UK manufacturing
/MACH 2026 is the UK’s national flagship event for the manufacturing and engineering industry. It will once again provide a powerful platform for innovation, collaboration and industry insights when it returns to the NEC Birmingham from 20–24 April 2026. Alongside the wealth of technology on display, the MACH 2026 seminar programme is designed to inform […]
Read more
MACH 2026 will showcase a wide range of solutions, live and in action, making it the year to visit
/MACH 2026, the UK’s national event for inspiring, innovating and connecting manufacturing, returns to the NEC Birmingham from 20-24 April 2026. As the UK’s longest-running exhibition of its kind, MACH 2026 brings together over 500 leading exhibitors to showcase the broadest range of manufacturing technology solutions in the country. Its unique scale and scope make […]
Read more
Unlocking opportunity; the investment case for automation and robotics
/HEADLINE SPONSOR CONTENT UK manufacturers are entering 2026 with exciting opportunities ahead and we believe that success will come from resilience, agility, and from smart investment in technology and automation. Lloyds continues to be headline sponsor of MACH Exhibition because we see the enormous value of showcasing new technology, machinery and new processes to manufacturers. […]
Read more
Empower Your Aluminium Machining
For many years now, aluminium materials have been becoming more and more prevalent in many industries. This trend continues unabated. While light-weight construction and corresponding materials and structures have always been an important aspect of aerospace, the use of aluminium to reduce weight in automobile manufacturing has increased steadily, and has really taken off now […]
Read more
Brake housings for autonomous driving
MAPAL’s solution is a technically sophisticated combination Combined brake housing unites main brake cylinder, brake booster and ABS/ESP in a single part. This component smooths the way for self-driving cars and saves weight. When it comes to machining complex aluminium workpieces, MAPAL’s solution expertise is very much in demand. While self-driving cars are already permitted […]
Read more
MAPAL has developed two sample components for the aerospace sector: a valve housing and a torsion joint
Complete know-how in one part MAPAL has developed two sample components for the aerospace sector. These so-called “generic components” cover all the demanding machining steps that may be involved in the production of hydraulic valve housings made of aluminum or torsion links for landing legs milled from titanium. Wherever something needs to be moved on […]
Read more
Turnkey with 78 suitable tools
Cooperation between the CHIRON Group and MAPAL in the USA In a factory in Charlotte, North Carolina, CHIRON America Inc. assembles turnkey solutions based on standard machines supplied by their German parent company in Tuttlingen. These solutions are customised to meet the specific needs of their customers. Once again, MAPAL was selected as partner and […]
Read moreAcrylic CNC Machining: A Comprehensive Guide
Polymethyl methacrylate (PMMA), commonly known as Acrylic, is a thermoplastic polymer renowned for its unique combination of properties. This transparent plastic material is valued for its exceptional optical clarity, surface hardness, weather resistance, and dimensional stability, positioning it as a superb alternative to glass for various reasons. Noteworthy features include: 50% Lighter Than Glass Generally […]
Read more
MAPAL sets the course for the future
Change of general partner to SE & Co. KG MAPAL Fabrik für Präzisionswerkzeuge Dr. Kress KG, the headquarters of the internationally active supplier of precision tools and machining solutions based in Aalen, is changing its legal structure. On 1 June 2025, the previous limited partnership (KG) will be converted into an SE & Co. KG […]
Read more
Service from programming through to component
Schabmüller taps into MAPAL’s expertise in aluminium Schabmüller Automobiltechnik GmbH (SMI) in Großmehring near Ingolstadt has been an automotive supplier since 1988 and has increasingly specialised in the efficient manufacture of large series. The parts are installed in vehicles made by Mercedes, Porsche, Audi, BMW and Jaguar, among others. SMI operates predominantly as a Tier […]
Read more
Starrag reports ‘unprecedented’ level of enquiries following MACH
/MACH 2024 saw the introduction of a host of new technologies from Starrag that had not been seen before in the UK, leading to an unprecedented level of enquiries. The Starrag stand had new machine technologies as well as virtual showroom platforms and the new global market position. The ‘meet and greet’ booth even entertained […]
Read moreMMMA Metalworking Village
/MACH 2024 MMMA Metalworking Village The MMMA invited visitors to come and engage with Members and that’s exactly what they did in great numbers. MACH 2024 was a resounding success for the MMMA and all the exhibiting members. Featuring over 20 member companies displaying a variety of Leading edge Technologies within the Sheetmetal, Metal Forming […]
Read more
£multi-million machining deal
/DTS (UK) and Nicolas Correa have strengthened their long-term relationship with WEC Group Ltd in a £multi-million deal at MACH 2024 this week. The Darwen-based manufacturer is building its factory of the future and is looking to become the largest sub-contract machining shop in Europe. To achieve this aim it has used the show to […]
Read more
