MACH 2026 | Where The UK Manufacturing Community Comes Together
/MACH 2026, the UK’s premier manufacturing and engineering exhibition, has already secured more than 65% of its floorplan, 16 months ahead of the event. Organised by The Manufacturing Technologies Association (MTA) and owned by the industry it serves, MACH brings together the entire UK manufacturing supply chain to celebrate innovation, showcase capabilities, and address the […]
Read more
MACH 2026 Secures Prime Position as the UK’s Leading Manufacturing Event
/The ballots for MACH 2026 have concluded, and the floorplan is rapidly filling up.With strong onsite sales, MACH 2026 is already well over 50% occupied, and all stands are now available for booking. As the premier UK event for the manufacturing sector, MACH 2026 is the place to showcase cutting-edge technologies, connect with industry leaders, […]
Read more
MACH 2024 is hailed a roaring success
/MACH 2024, the UK’s national event for inspiring, innovating, and connecting manufacturing, has once again been hailed as a triumph, with thousands of visitors filling the five halls at the NEC in Birmingham over the weeklong show in April. The 2024 edition of the exhibition saw a 6% increase in the number of visitors meaning […]
Read more
Report reveals ‘True Impact’ of manufacturing is nearly a quarter of UK GDP
/Manufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today. ‘The True Impact of UK Manufacturing’, which will be unveiled at MACH 2024 in Birmingham later, shows industry is worth £518billion and supports 7.3million UK jobs directly and across the supply chains/communities it […]
Read more
Visit the MMMA Metalworking Village in Hall 6 at MACH 2024
/Established in 1949, the Metalforming Machinery Makers Association (MMMA) is the only trade body solely dedicated to the sheet metalforming industry representing companies specialising in sheet metal, metalforming and fabrication. MMMA will be celebrating its 75th Anniversary at MACH 2024 which takes place between 15-19 April at the NEC Birmingham. MMMA is very excited to […]
Read more
Walking the floor: A starting point for sustainability
/New for MACH 2024, Lloyds Bank is hosting a Sustainability Solutions Hub at Stand 18-650 in partnership with the Manufacturing Technology Centre (MTC). For manufacturers looking to understand where to begin on their journey to Net Zero or what support is available, we are on hand to help. Here, David Atkinson, UK Head of Manufacturing […]
Read more
New Knowledge Hubs initiative at MACH 2024
/Reversing UK manufacturing’s poor record for adopting new technology will be tackled head on at MACH 2024 as The Manufacturing Technologies Association (MTA) launches its new Knowledge Hubs initiative, showcasing how to adopt new technology to improve productivity and efficiency in manufacturing.
Read more
Changing times: Manufacturers’ unprecedented opportunity
/We’re looking forward to meeting manufacturers from across the country at MACH 2024, to hear about their strategies for the year ahead and discuss how we can support.
Here David Atkinson, UK Head of Manufacturing SME & Mid Corporates, Lloyds Bank, and James Selka, CEO of Manufacturing Technologies Association (MTA) discuss their ambitions for the sector in 2024.
Sandvik Coromant announced as headline sponsor of the MACH 2024 Education & Development Zone
/The Education and Development (E&D) Zone at MACH 2024 is once again being sponsored by global metalcutting specialist, Sandvik Coromant.
Read more
Knowledge Hub initiative to be core theme of MACH 2024
/Reversing UK manufacturing’s poor record for adopting new technology will be tackled head on at MACH 2024. The Manufacturing Technologies Association (MTA) has made it its mission to spearhead growth by using its flagship event to launch its new Knowledge Hubs initiative. The programme showcases the latest technology to exhibitors, helping manufacturers learn more about […]
Read moreMACH 2026 | Where The UK Manufacturing Community Comes Together
/MACH 2026, the UK’s premier manufacturing and engineering exhibition, has already secured more than 65% of its floorplan, 16 months ahead of the event. Organised by The Manufacturing Technologies Association (MTA) and owned by the industry it serves, MACH brings together the entire UK manufacturing supply chain to celebrate innovation, showcase capabilities, and address the […]
Read moreMACH 2026 Secures Prime Position as the UK’s Leading Manufacturing Event
/The ballots for MACH 2026 have concluded, and the floorplan is rapidly filling up.With strong onsite sales, MACH 2026 is already well over 50% occupied, and all stands are now available for booking. As the premier UK event for the manufacturing sector, MACH 2026 is the place to showcase cutting-edge technologies, connect with industry leaders, […]
Read more
Starrag reports ‘unprecedented’ level of enquiries following MACH
/MACH 2024 saw the introduction of a host of new technologies from Starrag that had not been seen before in the UK, leading to an unprecedented level of enquiries. The Starrag stand had new machine technologies as well as virtual showroom platforms and the new global market position. The ‘meet and greet’ booth even entertained […]
Read moreMMMA Metalworking Village
/MACH 2024 MMMA Metalworking Village The MMMA invited visitors to come and engage with Members and that’s exactly what they did in great numbers. MACH 2024 was a resounding success for the MMMA and all the exhibiting members. Featuring over 20 member companies displaying a variety of Leading edge Technologies within the Sheetmetal, Metal Forming […]
Read more
£multi-million machining deal
/DTS (UK) and Nicolas Correa have strengthened their long-term relationship with WEC Group Ltd in a £multi-million deal at MACH 2024 this week. The Darwen-based manufacturer is building its factory of the future and is looking to become the largest sub-contract machining shop in Europe. To achieve this aim it has used the show to […]
Read more
Quality, Reliability and Longevity
Please open the “Featured Image” file below. For further information please call Berger Tools on 01732 763377, email [email protected] or visit www.berger-tools.co.uk Berger Tools -Applications Engineering. From the UK’s most experienced supplier of Bespoke & Standard Engineering Parts.
Read more
Match made in tooling leads to press investment at MACH 2024
A specialist supplier to F1, automotive and aerospace sectors is looking to increase its tool try-out capacity by purchasing its first Bruderer press at MACH 2024. Alan Spargo Ltd, which celebrates 50 years in business in 2025, has invested in a BSTA 40-tonne machine to help it provide its growing list of customers with the […]
Read more
Giving Clean a New Meaning
Please open the “Featured Image” file below. For further information please call Berger Tools on 01732 763377, email [email protected] or visit www.berger-tools.co.uk Berger Tools -Applications Engineering. From the UK’s most experienced supplier of Bespoke & Standard Engineering Parts.
Read more
Cleaning-Optimized Leveling Feet
Please open the “Featured Image” file below. For further information please call Berger Tools on 01732 763377, email [email protected] or visit www.berger-tools.co.uk Berger Tools -Applications Engineering. From the UK’s most experienced supplier of Bespoke & Standard Engineering Parts.
Read more
Aluminium Profile Systems Designed for User-Friendliness
Please open the “Featured Image” file below. For further information please call Berger Tools on 01732 763377, email [email protected] or visit www.berger-tools.co.uk Berger Tools -Applications Engineering. From the UK’s most experienced supplier of Bespoke & Standard Engineering Parts.
Read more